Magaca iyo Nooca Badeecada: Filim ka hortag ahTaxanaha YM30
Astaamaha Muhiimka ah ee Badeecada
hal ama labanlaab rinjiyeyn, shaqo ka hortag ah oo aad u fiican oo ay adag tahay in la dib dhigo, fidsanaan aad u fiican, adkeysi kuleyl oo wanaagsan, tayo dusha sare oo fiican.
Codsiga ugu Weyn
loo isticmaalo filimka ilaalinta ka hortagga jeermiska, filimka ilaalinta koollada ka hortagga jeermiska (ka hortagga jeermiska, u adkaysta boodhka).
Qaab-dhismeedka
Xaashida Xogta
Dhumucda YM30A waxaa ka mid ah: 38μm, 50μm, 75μm, 100μm iyo 125μm, iwm.
| HANTIDA | CUTUBKA | QIIMAHA CAADIGA AH | HABKA IMTIXAANKA | ||
| DHUUMASHADA | µm | 38 | 50 | ASTM D374 | |
| AWOODDA TOOGASHADA | MD | MPA | 254 | 232 | ASTM D882 |
| TD | MPA | 294 | 240 | ||
| TARTAN | MD | % | 153 | 143 | |
| TD | % | 124 | 140 | ||
| Yaraanshaha Kulaylka | MD | % | 1.24 | 1.15 | ASTM D1204 （150℃×30 daqiiqo) |
| TD | % | 0.03 | -0.01 | ||
| ISKU-DHAFKA ISKU-DHAFKA | μs | — | 0.32 | 0.28 | ASTM D1894 |
| μd | — | 0.39 | 0.29 | ||
| Gudbinta | % | 93.8 | 92.8 | ASTM D1003 | |
| CEERYAARO | % | 1.97 | 2.40 | ||
| ISKA DIFAACIDDA SAGXADA | Ω | 105-10 | GB 13542.4 | ||
| DHAQSO DHAAF AH | % | ≥97 | HABKA LATTICE-KA | ||
| XASAASIGA QOYNTA | dayn/cm | 58/58 | 58/58 | ASTM D2578 | |
| MUUQAALKA | — | OK | Habka EMTCO | ||
| FAALLO | Kor waxaa ku yaal qiimayaasha caadiga ah, ee maaha qiimayaasha dammaanadda. Haddii macaamiishu ay leeyihiin shuruudo gaar ah, sida waafaqsan fulinta qandaraaska farsamada. | ||||
Baaritaanka xiisadda qoyaanka waxaa lagu dabaqi karaa oo keliya filimka lagu daweeyay fayraska corona.
Taxanaha YM30 waxaa ka mid ah YM30, YM30A, YM31, way ka duwan yihiin AS primer-ka.
Waqtiga boostada: Sebtembar-03-2024
